Differences

This shows you the differences between two versions of the page.

--- siteadmin:clearpass_-_setting_o-n [2026/08/11 13:31] – admin
+++ siteadmin:clearpass_-_setting_o-n [2026/08/11 13:32] (current) – admin
@@ Line 3: / Line 3: @@
 The Operator-Name attribute is used to identify the Visited Site to the Home Site. i.e. when a user joins at a Visited Site the name of the site is passed through in a RADIUS Request to the Home Site. The Home Site might use this information to generate statistics on where its users are visiting or to report problems with the Visited Site.
-Setting the Operator-Name in Clearpass is impossible if your configuration uses a **RADIUS Proxy** Service to proxy unknown requests to the Jisc NRPS but easy if you use the \\RADIUS Enforcement (Generic)\\ Service with the NRPS as Authentication Sources.
+Setting the Operator-Name in Clearpass is impossible if your configuration uses a **RADIUS Proxy** Service to proxy unknown requests to the Jisc NRPS but easy if you use the **RADIUS Enforcement (Generic)** Service with the NRPS as Authentication Sources.
-Below the configuration assumes the use a \\RADIUS Enforcement (Generic)\\ Service because that's the only way that Clearpass will allow attributes to be added to the Access Request.
+Below the configuration assumes the use a **RADIUS Enforcement (Generic)** Service because that's the only way that Clearpass will allow attributes to be added to the Access Request.
 ====Authentication Source====