Differences

This shows you the differences between two versions of the page.

--- siteadmin:freeradius_operator-name_setting [2024/05/02 10:16] – admin
+++ siteadmin:freeradius_operator-name_setting [2025/03/11 15:39] (current) – admin
@@ Line 20: / Line 20: @@
 As an RFO you're in a position to rewrite the Operator-Name in the outer RADIUS tunnel. This can be useful if your connected sites aren't setting it themselves, or are setting it wrongly. Ideally each site should set it appropriately because some sites might have multiple O-Ns in use and are in the best position to set them accurately. However, some RADIUS servers (NPS in particular) can't set O-N.
-Best case is that all sites everywhere set the correct O-N and it's proxied untouched to Jisc. This requires that all connect sites run appropriate software which is configured correctly.
+Best case is that all sites everywhere set the correct O-N and it's proxied untouched to Jisc. This requires that all connected sites run appropriate software which is configured correctly.
 Second best case is that the RFO sets the missing O-N for sites as the packets are proxied through them.
@@ Line 39: / Line 39: @@
         require_message_authenticator = yes
 }
+client holby-nhs-uk-1 {
+        ipaddr = server2.holby.nhs.uk
+        secret = lisaisaseriealkiller
+        operator = "1holby.nhs.uk" # Add this internal variable
+        require_message_authenticator = yes
+}
 </code>