Differences

This shows you the differences between two versions of the page.

--- siteadmin:called_station_id [2025/11/20 13:37] – admin
+++ siteadmin:called_station_id [2025/11/20 14:01] (current) – admin
@@ Line 71: / Line 71: @@
   - Set the type: Find the "Auth Called Station ID Type" option and select your desired value from the drop-down menu: AP MAC Address:SSID
   - Apply changes: Click Apply to save the configuration.
+====Ruckus Wireless====
+Via CLI (ZoneDirector)
+  - Log in to the controller as an administrator.
+  - Enter privileged EXEC mode by typing en.
+  - Enter configuration mode by typing conf.
+  - Navigate to the specific WLAN configuration by typing wlan "<wlan_name>" (e.g., wlan "test").
+  - Change the called-station-id-type to ap-mac by typing called-station-id-type ap-mac.
+  - Exit and save the configuration by typing end.
+Via GUI (SmartZone or other platforms)
+  - Log in to the controller's web interface.
+  - Navigate to the WLAN or Wi-Fi configuration settings.
+  - Find the specific WLAN you want to configure and look for a networking or RADIUS settings tab.
+  - Locate the "Called Station ID" or "RADIUS Called Station ID" option.
+  - Choose the desired format from the available options: "APMAC:SSID".
+  - Save the changes.
+====Meraki Wireless====
+https://documentation.meraki.com/Wireless/Design_and_Configure/Configuration_Guides/Access_Control/MR_Meraki_RADIUS_2.0
+{{:siteadmin:screenshot_of_called_station_attribute_options.png?400|}}
+====Aerohive====
+HiveManager GUI
+  - Navigate to Security > RADIUS in the left-hand menu.
+  - Go to Authentication to find the "Auth Called Station ID Type" setting.
+  - Select the format you want from the dropdown menu:
+    - AP MAC Address:SSID